Item Tag: Grid Tie Inverter

Solaredge SE3800H-US Single-Phase Grid-tie Inverter

The Solaredge SE3800H-US Single-Phase Grid-tie Inverter is a high-quality device designed for connecting solar power systems to the grid. With a current output of 16A, this inverter is suitable for various home and garden electrical improvements. Its anti-island protection properties ensure the safety and efficiency of the system. By utilizing string inverter technology, this model is able to handle up to 240VAC of power from solar sources, making it a reliable choice for alternative energy supplies. Removed from system as micro inverters were installed. Works 100% as it should, feel free to ask questions.

SM-S460 Synergy Grid Single Phase Utility Grid Tie Inverter 53-65 VDC, 50mA-10A

As pictured. SM-S460 Synergy Single Phase Utility Grid Tie Inverter. DC Input power tracking voltage:53-65 VDC, DC input current range:50mA-10A, Enclosure rating:IPX4. AC output:187-229 VRMS,50/60hz,. Max. output rating:2A. Max. output fault current:3.15A. Max grid backfeed current:50mA. Power factor rating:0.99. Temp range: -40 to 65C. P/N: 100-060US-01. New old stock.

600W MPPT Solar Grid Tie Inverter Waterproof Pure Sine Wave DC22-50V LCD Display

WVC-600W MPPT Waterproof Solar Grid Tie Micro Inverter DC22-50V Pure Sine Wave Inverter with LCD Display Note: This inverter does not have the monitoring function. LCD display, remote meterOptional LCD meter to our gird tie inverterAutomatic identify the inverter, and display relevant parameter data and system working statusScreen data: AC voltage, current and frequency, generating capacity, power factor 600W waterproof grid tie inverter,pure sine wave inverter.DC20V-50V to AC120V or 230V, 50Hz/60Hz auto.Waterproof IP65. System Function◆ 6-grade power search—In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .◆ Wide voltage input(22-50VDC)—1. DC voltage input:22~50VDC; 2. Second level power variable voltage conversion.◆ High-frequency two-way and one-way grid function—1. High frequency direct modulation, AC half wave synthesis;2. Two-way grid means: Load consume directly. And can reverse AC current transmission.◆ Kinds of frequency output function—1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz ~ 64Hz;◆Directly connected to the solar panels (do not need to connect the battery)◆ AC 0 angle with high precision auto-detection—High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.1. AC phase shift: 99%>99%Max unit per branch circuit 5pcs (single-phase)10pcs (single-phase)Output efficiency@120VAC@230VACStatic MPPTefficiency99.5%99.5%Maximum output efficiency90.5%90.5%Night power consumption<1W<1WTHD<5%<5%ParametersWorking temperature range-40℃to +60℃Dimension283mm×200mm×41.6mmNet weight1.63kgWaterproof gradeIP65CoolingSelf-coolingCommunication mode433/462MHz wireless communicationPower transmission modeReverse transfer, load priorityElectromagnetic compatibilityEN50081.part1 EN50082.part1Grid disturbanceEN61000-3-2 safety EN62109Grid detectionDIN VDE 1026 UL1741 What's in Package: 1x WVC-600W Grid Tie inverter1x LCD meter (optional)1x AC Cable1x User manual 1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives. 2. Any Customs tax applied to this package should be covered by buyers. 3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office. Contact Us: 1. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback. 2. Please contact us by "Ask a question". Payment 1. Payment methods accepted : Paypal only. 2. Payment must be received within 7 business days of auction closing. Shipping 1. We ship your orders within 1-3 business days after the payment received. 2. Item shipped via Singapore Post or HongKong Post , It takes about 7-30 business days (USA,CA,AU,UK).others country 10-20 business days(Brzil,India,RU),Exact delivery time depends on postal process. 3. If you do not receive your item(s) by 30 business days,Please feel free to contact us via ebay mail system , we will try our very best to resolve any problems with you Return Policy 1. Return is accepted within 30 days after the buyer's receiving the item. 2. If this item is defective upon receipt, customer has up to 14 days from date of receipt for exchange of a new one. 3. Unused/unopened merchandise will be fully credited. Other Policies We are not responsible for any custom duty or import tax. If you need we write low price on shipping bill, pls leave message when you make payment . All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find . 　 　

1000W Solar Grid Tie Inverter w/ Limiter MPPT Pure Sine Wave DC22-60V to 110VAC

Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V New upgraded firmware Version 5.1 enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of New upgraded firmware Version 5.1 enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter . User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged . Introduction Why we produced the GTI-L — It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem.This is the 2nd generation GTIL .The first generation GTIL must be used with an additional limiter module,we also add an switch button to enable the inverter either can work at limit mode or at normal grid tie mode. With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customer’s cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting. Specifications: Input Data Input Voltage Range 22-65v Max input DC voltage 60V Peak power tracking voltage 25-60V Output Data Max output power 1000W Nominal Voltage 110vac/230vac auto sensing Nominal Voltage Range 95-140v Frequency Range 47.5-51.5 for 50hz; 59.3-60.5 for 60hz Power Factor >0.95 Output Waveform Pure sine wave Characteristic Data MPPT Efficiency 99% Over current protection yes Over temperature protection yes Reverse polarity protection yes Anti-island protection yes Stackable Just for AC output Operating temperature range -20 ‘C — +50 ‘C Inverter inside temperature -20 ‘C — +85 ‘C Current THD <5% Voltage THD 92% Warranty 2 years Settings Explainations on the LCD of the 2nd Generation GTIL: The GTIL including various functions,all functions should configurate on the LCD setting page.Please see below explaination: 1. Limit Mode:External limiter and Internal limiter are settable, Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. 2.LCD back light:Select it,Lcd will always on.Unselect it,Lcd will auto turn off after about 10s without any action on lcd button.Press any of the button to light lcd again. 3.Remote Num:while using with wifi plug for monitoring,set by 1.While using with the WIFI-RTU(one rtu can monitoring multiple inverters),set monitored inverter numbers. 4.Bat or solar limited current mode:This function is usable while using with battery.the setted voltage will be the cut off voltage,this means while battery discharged to the setted voltage point or below setted point,inverter will auto disconnect from the battery and stop operating.This can prevent the battery from over discharged.The setted current means inverter will discharge the battery at this current level.Mppt function of the inverter will auto invalid when working under this setting.Set is 0.1V/step. 5.Reboot voltage:This setting voltage means while battery charged back,the inverter will auto restart after voltage reached the setting point.It convenient the user and make the function very flexible.Set is 0.1V/Step. 6.Battery and solar limited power mode:At this working mode,cut off voltage setting is same as 6.4,and the power setting is the maximum output power of the inverter.by this setting,user can limit the output power manually. Important information 7.1.The 22-65V type inverter will start up at 25V,and 45-90V type inverter will start up at 49.5V,after start,inverter can still work until 22v or 45v. 7.2.Current sensor Orientation:Please check the current flow direction arrow on the sensor before use,make sure the connection is correct.otherwise,inverter will not start up at limit mode. 7.3. Negative power under AC voltage means power overflow to the grid.positive means power come from the grid. Packing Iist: Inverter—1pcs; Clamp Sensor with 2m cable—1pcs; Power Cable—1pcs English Manual–1pcs; WARRANTY : 2Years Technical support and service are provided for the inverter the whole life. SHIPPING : We ship to international via EMS or FEDEX or DHL or TNT or other express . Items are shipped within 1-3 business day after receive cleared payment. FEEDBACK Note: Do not hesitate to talk with us anytime before and after the purchases, we are committed to your 100% customer satisfaction. I am here and ready to assist you with any question or concerns you might have before or after the purchase. If you have the problem with the power inverter, please talk with us first with eBay message BEOFRE you open return request or file a dispute or leave the netural or negative feedback. My goal is to make sure you are happy and having the pleasant shopping with us.

1000W Solar Grid Tie Inverter w/ Limiter MPPT Pure Sine Wave DC22-60V to 110VAC

Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V New upgraded firmware Version 5.1 enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of New upgraded firmware Version 5.1 enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter . User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged . Introduction Why we produced the GTI-L — It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem.This is the 2nd generation GTIL .The first generation GTIL must be used with an additional limiter module,we also add an switch button to enable the inverter either can work at limit mode or at normal grid tie mode. With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customer’s cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting. Specifications: Input Data Input Voltage Range 22-65v Max input DC voltage 60V Peak power tracking voltage 25-60V Output Data Max output power 1000W Nominal Voltage 110vac/230vac auto sensing Nominal Voltage Range 95-140v Frequency Range 47.5-51.5 for 50hz; 59.3-60.5 for 60hz Power Factor >0.95 Output Waveform Pure sine wave Characteristic Data MPPT Efficiency 99% Over current protection yes Over temperature protection yes Reverse polarity protection yes Anti-island protection yes Stackable Just for AC output Operating temperature range -20 ‘C — +50 ‘C Inverter inside temperature -20 ‘C — +85 ‘C Current THD <5% Voltage THD 92% Warranty 2 years Settings Explainations on the LCD of the 2nd Generation GTIL: The GTIL including various functions,all functions should configurate on the LCD setting page.Please see below explaination: 1. Limit Mode:External limiter and Internal limiter are settable, Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. 2.LCD back light:Select it,Lcd will always on.Unselect it,Lcd will auto turn off after about 10s without any action on lcd button.Press any of the button to light lcd again. 3.Remote Num:while using with wifi plug for monitoring,set by 1.While using with the WIFI-RTU(one rtu can monitoring multiple inverters),set monitored inverter numbers. 4.Bat or solar limited current mode:This function is usable while using with battery.the setted voltage will be the cut off voltage,this means while battery discharged to the setted voltage point or below setted point,inverter will auto disconnect from the battery and stop operating.This can prevent the battery from over discharged.The setted current means inverter will discharge the battery at this current level.Mppt function of the inverter will auto invalid when working under this setting.Set is 0.1V/step. 5.Reboot voltage:This setting voltage means while battery charged back,the inverter will auto restart after voltage reached the setting point.It convenient the user and make the function very flexible.Set is 0.1V/Step. 6.Battery and solar limited power mode:At this working mode,cut off voltage setting is same as 6.4,and the power setting is the maximum output power of the inverter.by this setting,user can limit the output power manually. Important information 7.1.The 22-65V type inverter will start up at 25V,and 45-90V type inverter will start up at 49.5V,after start,inverter can still work until 22v or 45v. 7.2.Current sensor Orientation:Please check the current flow direction arrow on the sensor before use,make sure the connection is correct.otherwise,inverter will not start up at limit mode. 7.3. Negative power under AC voltage means power overflow to the grid.positive means power come from the grid. Packing Iist: Inverter—1pcs; Clamp Sensor with 2m cable—1pcs; Power Cable—1pcs English Manual–1pcs; WARRANTY : 2Years Technical support and service are provided for the inverter the whole life. SHIPPING : We ship to international via EMS or FEDEX or DHL or TNT or other express . Items are shipped within 1-3 business day after receive cleared payment. FEEDBACK Note: Do not hesitate to talk with us anytime before and after the purchases, we are committed to your 100% customer satisfaction. I am here and ready to assist you with any question or concerns you might have before or after the purchase. If you have the problem with the power inverter, please talk with us first with eBay message BEOFRE you open return request or file a dispute or leave the netural or negative feedback. My goal is to make sure you are happy and having the pleasant shopping with us.

Av. Ten. Ismael de Souza Dias, nº 248
Buenos Aires – S. J. do Rio Pardo – SP

© 2025 Adritech. Todos os Direitos Reservados. Política de Privacidade | Política de Cookies